Page MenuHome Accel-ppp
Files F291

accel-ppp.conf
yakovlev.alexey.n (Alexey)
Actions

Authored By
yakovlev.alexey.n
May 15 2020, 11:18
Size
5 KB
Referenced Files
None
Subscribers
None

accel-ppp.conf
View Options

[modules]
log_file
log_syslog
log_tcp
#log_pgsql
pptp
l2tp
#sstp
#pppoe
#ipoe
auth_mschap_v2
#auth_mschap_v1
auth_chap_md5
#auth_pap
radius
#chap-secrets
ippool
pppd_compat
shaper
#net-snmp
#logwtmp
#connlimit
#ipv6_nd
#ipv6_dhcp
#ipv6pool
[core]
log-error=/var/log/accel-ppp/core.log
thread-count=4
[common]
single-session=replace
#sid-case=upper
#sid-source=seq
#max-sessions=1000
[ppp]
#verbose=1
min-mtu=1280
mtu=1400
mru=1400
#accomp=deny
#pcomp=deny
ccp=0
#check-ip=0
#mppe=require
ipv4=require
ipv6=deny
ipv6-intf-id=0:0:0:1
ipv6-peer-intf-id=0:0:0:2
ipv6-accept-peer-intf-id=1
lcp-echo-interval=20
#lcp-echo-failure=3
lcp-echo-timeout=120
unit-cache=1
#unit-preallocate=1
[auth]
#any-login=0
#noauth=0
[pptp]
#verbose=1
echo-interval=30
ifname=pptp%d
[pppoe]
verbose=1
#ac-name=xxx
#service-name=yyy
#pado-delay=0
#pado-delay=0,100:100,200:200,-1:500
called-sid=mac
#tr101=1
#padi-limit=0
#ip-pool=pppoe
#ifname=pppoe%d
#sid-uppercase=0
#vlan-mon=eth0,10-200
#vlan-timeout=60
#vlan-name=%I.%N
#interface=eth1,padi-limit=1000
interface=eth0
[l2tp]
#verbose=1
dictionary=/usr/share/accel-ppp/l2tp/dictionary
#hello-interval=60
#timeout=60
#rtimeout=1
#rtimeout-cap=16
#retransmit=5
#recv-window=16
host-name=sk5-301-vpn1
#dir300_quirk=0
#secret=0123456789
dataseq=allow
#reorder-timeout=0
#ip-pool=l2tp
ifname=l2tp%d
[sstp]
verbose=1
#cert-hash-proto=sha1,sha256
#cert-hash-sha1=
#cert-hash-sha256=
#accept=ssl,proxy
#ssl-dhparam=/etc/ssl/dhparam.pem
#ssl-ecdh-curve=prime256v1
#ssl-ciphers=DEFAULT
#ssl-prefer-server-ciphers=0
#ssl-ca-file=/etc/ssl/sstp-ca.crt
#ssl-pemfile=/etc/ssl/sstp-cert.pem
#ssl-keyfile=/etc/ssl/sstp-key.pem
#host-name=domain.tld
#http-error=allow
#timeout=60
#hello-interval=60
#ip-pool=sstp
#ifname=sstp%d
[ipoe]
verbose=1
username=ifname
#password=username
lease-time=600
renew-time=300
max-lease-time=3600
#unit-cache=1000
#l4-redirect-table=4
#l4-redirect-ipset=l4
#l4-redirect-on-reject=300
#l4-redirect-ip-pool=pool1
shared=0
ifcfg=1
mode=L2
start=dhcpv4
#start=up
#ip-unnumbered=1
#proxy-arp=0
#nat=0
#proto=100
#relay=10.10.10.10
#vendor=Custom
#weight=0
#attr-dhcp-client-ip=DHCP-Client-IP-Address
#attr-dhcp-router-ip=DHCP-Router-IP-Address
#attr-dhcp-mask=DHCP-Mask
#attr-dhcp-lease-time=DHCP-Lease-Time
#attr-dhcp-opt82=DHCP-Option82
#attr-dhcp-opt82-remote-id=DHCP-Agent-Remote-Id
#attr-dhcp-opt82-circuit-id=DHCP-Agent-Circuit-Id
#attr-l4-redirect=L4-Redirect
#attr-l4-redirect-table=4
#attr-l4-redirect-ipset=l4-redirect
#lua-file=/etc/accel-ppp.lua
#offer-delay=0,100:100,200:200,-1:1000
#vlan-mon=eth0,10-200
#vlan-timeout=60
#vlan-name=%I.%N
#ip-pool=ipoe
#idle-timeout=0
#session-timeout=0
#soft-terminate=0
#check-mac-change=1
#calling-sid=mac
#local-net=192.168.0.0/16
interface=eth0
[dns]
dns1=10.74.240.10
dns2=10.98.240.10
[wins]
#wins1=172.16.0.1
#wins2=172.16.1.1
[radius]
dictionary=/usr/share/accel-ppp/radius/dictionary
dictionary=/usr/share/accel-ppp/radius/dictionary.cisco
nas-identifier=SK5-301-VPN1
nas-ip-address=10.32.240.28
gw-ip-address=10.32.240.28
server=10.74.242.10,smjkOd4VmSVH,auth-port=1812,acct-port=1813,req-limit=0,fail-timeout=2,max-fail=2,weight=3
server=10.98.242.10,smjkOd4VmSVH,auth-port=1812,acct-port=1813,req-limit=0,fail-timeout=2,max-fail=2,weight=2
server=10.106.242.10,smjkOd4VmSVH,auth-port=1812,acct-port=1813,req-limit=0,fail-timeout=2,max-fail=2,weight=1
dae-server=127.0.0.1:3799,testing123
#verbose=1
#timeout=3
#max-try=3
acct-timeout=0
#acct-delay-time=0
#acct-on=0
#attr-tunnel-type=My-Tunnel-Type
[client-ip-range]
0.0.0.0/0
[ip-pool]
gw-ip-address=10.32.240.28
#vendor=Cisco
#attr=Cisco-AVPair
attr=Framed-Pool
tunnel=10.240.64.0/18,pool1
tunnel=10.240.160.0/19,pool2
tunnel=10.240.194.0/23,pool3
#tunnel=10.240.196.0/23,pool4
tunnel=10.240.204.0/22,pool5
tunnel=10.240.224.0/21,pool6
#192.168.0.2-255
#192.168.1.1-255,pool2
#192.168.2.1-255,name=pool2
#192.168.3.1-255,name=pool3
#192.168.4.1-255,name=pool4,next=pool1
#192.168.4.0/24
[log]
log-file=/var/log/accel-ppp/accel-ppp.log
log-emerg=/var/log/accel-ppp/emerg.log
log-fail-file=/var/log/accel-ppp/auth-fail.log
#log-debug=/dev/stdout
syslog=accel-pppd,daemon
#log-tcp=127.0.0.1:3000
copy=1
#color=1
#per-user-dir=per_user
#per-session-dir=per_session
#per-session=1
level=1
[log-pgsql]
conninfo=user=log
log-table=log
[pppd-compat]
#verbose=1
#ip-pre-up=/etc/ppp/ip-pre-up
#ip-up=/etc/ppp/ip-up
#ip-down=/etc/ppp/ip-down
#ip-change=/etc/ppp/ip-change
radattr-prefix=/var/run/radattr
#fork-limit=16
[chap-secrets]
gw-ip-address=192.168.100.1
#chap-secrets=/etc/ppp/chap-secrets
#encrypted=0
#username-hash=md5
[shaper]
vendor=Cisco
attr=Cisco-AVPair
#attr=Filter-Id
#down-burst-factor=0.1
#up-burst-factor=1.0
#latency=50
#mpu=0
#mtu=0
#r2q=10
#quantum=1500
#moderate-quantum=1
#cburst=1534
#ifb=ifb0
up-limiter=police
down-limiter=tbf
#leaf-qdisc=sfq perturb 10
#leaf-qdisc=fq_codel [limit PACKETS] [flows NUMBER] [target TIME] [interval TIME] [quantum BYTES] [[no]ecn]
#rate-multiplier=1
#fwmark=1
#verbose=1
[snmp]
master=0
agent-name=accel-ppp
[connlimit]
limit=100/min
burst=3
timeout=60
[ipv6-pool]
#gw-ip6-address=fc00:0:1::1
fc00:0:1::/48,64
delegate=fc00:1::/36,48
[ipv6-dns]
#fc00:1::1
#fc00:1::2
#fc00:1::3
#dnssl=suffix1.local.net
#dnssl=suffix2.local.net.
[ipv6-dhcp]
verbose=1
pref-lifetime=604800
valid-lifetime=2592000
route-via-gw=1

File Metadata

Mime Type
text/plain
Storage Engine
amazon-s3
Storage Format
Raw Data
Storage Handle
phabricator/jz/yj/q2iojozk4tborhui
Default Alt Text
accel-ppp.conf (5 KB)

Event Timeline