accel does not modify gw in session on debian 11 with mode=L3
accel-cmd show version
> 1.12.0-140-gaa9e2ee
drivers/ipoe/ipoe.c
add
```
1479 pr_info("ipoe: modify %08x %08x %08x\n", ses->peer_addr, ses->addr, ses->gw);
```
dmesg
> ipoe: modify 0100c70a 00000000 0101010a
ip ad
> 501: ipoe0: <POINTOPOINT,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 100
> link/ether 00:25:90:20:8c:21 peer ff:ff:ff:ff:ff:ff
> inet 10.1.1.1 peer 10.199.0.1/32 scope global ipoe0
ip ro get 10.199.0.1
```
10.199.0.1 dev ipoe0 src 10.1.1.2 uid 0
```
dont see via